Jasminer X16-Q Jasminer X16-Q ETC Miner
X16-Q Jasminer Profitabilitätsanalysen, unterstützt durch Echtzeitdaten: Entdecken Sie, wie viel Ihr X16-Q Jasminer Kann mit unserem fortschrittlichen ASIC Miner-Rechner verdient werden. Wir verwenden aktuelle Mining-Belohnungsdaten und berücksichtigen automatisch die Stromkosten, um Ihnen einen klaren Überblick über Ihre potenziellen täglichen, monatlichen und jährlichen Erträge zu geben.
Profitabilitätsanalyse
Hier können Sie eine detaillierte Analyse der Rentabilität von Minern sehen, die in Echtzeit aktualisiert wird.
| . | Einkommen | Ausgabe | Gewinn |
|---|---|---|---|
|
Täglich
|
$1.33 | $1.19 |
$0.14
|
|
Monatlich
|
$39.91 | $35.71 |
$4.20
|
|
Jährlich
|
$485.60 | $434.50 |
$51.10
|
Über die Jasminer X16-Q Jasminer (1.95GH/s)
Erfahren Sie mehr über diesen ASIC Miner, einschließlich seiner Spezifikationen, Leistung, Energieverbrauch und Rentabilität.
The Jasminer X16-Q would offer a compact, quiet, and efficient path into EtHash mining, delivering 1.95 GH/s at 620 W for an energy efficiency of about 0.318 J/MH, so one could sustain competitive throughput while containing heat and operating costs, especially in home environments where its 40 dB profile would recede like a soft hum; designed for Ethereum Classic and other EtHash-based assets still mined by ASICs, it brings 8 GB of memory that would accommodate current DAG sizes and anticipated growth, while its optimized architecture would favor stable operation across 5–40°C and 5–95% humidity when airflow is well managed; with Ethernet connectivity and an included power supply, deployment would be straightforward on typical circuits (roughly 5.2 A at 120 V or 2.6 A at 240 V), and its compact form would suit shelves or small racks provided exhaust paths remain clear; profitability would hinge on network difficulty, pool fees, uptime, and local electricity tariffs, and a miner could refine expectations using a profit calculator that models daily, monthly, and yearly outcomes across different power rates while accounting for hashrate, efficiency, and downtime, with further gains possible by choosing low-latency pools, aligning operation with off-peak periods, and monitoring temperatures to avoid throttling; in this balance of watts, hashes, and quiet, the X16-Q would stand as a practical choice for both individual enthusiasts and larger arrays seeking dense, low-noise performance for Ethereum Classic.
Entdecke, welche Coins dieser Miner minen kann
Erforschen Sie die Kryptowährungen, die abgebaut werden können mit Jasminer X16-Q Jasminer (1.95GH/s), einschließlich detaillierter Rentabilität.
Währungsumrechner
Berechne die minbaren Coins in jede Währung.
| Coin | Einkommen/Tag | Profit/Tag |
|---|---|---|
|
$1.31
$
0.00001287
|
$0.12
$
0.00000116
|
|
|
$1.33
$
0.08686644
|
$0.14
$
0.00901164
|
Historische Mining-Leistung
Betrachten Sie die Leistungstrends von Jasminer X16-Q Jasminer (1.95GH/s) über wöchentliche, monatliche und jährliche Zeiträume.
Historische Rentabilität
Betrachten Sie die historischen Einkommens- und Gewinntrends für diesen Miner.
Etchash Miner Generationen
Entwicklung der Hardware für das Kryptowährungs-Mining im Laufe der Jahre, mit der aktuellen Generation zur Referenz hervorgehoben.
Generation 1
5 MinerGeneration 2
5 MinerGeneration 3
5 MinerGeneration 4
5 MinerGeneration 5
5 MinerGeneration 6
5 MinerGeneration 7
6 MinerMehr Informationen über die
Erfahren Sie mehr über die Jasminer X16-Q Jasminer (1.95GH/s)
The Jasminer X16-Q is a purpose-built EtHash ASIC tuned for Ethereum Classic that pairs a dense, low-latency architecture with practical, everyday deployability, delivering 1.95 GH/s at about 620 W-an efficiency near 0.318 J/MH-while its multi-layer thermal stack (think heat spreading, short conduction paths, and airflow that doesn’t fight itself) keeps core temperatures steady under sustained load; a quiet 40 dB acoustic profile and compact chassis make it plausible for apartments or small studios, especially if you add vibration-damping feet and avoid hard reflective surfaces, and with roughly 2,100 BTU/h of heat output you can plan ventilation accordingly (on the order of 100–120 CFM if you budget for an ~18°F rise), keeping the intake path clean and the exhaust unobstructed; under the hood, an FPGA-based controller trims scheduling overhead on EtHash/Etchash workloads and plays well with adaptive frequency scaling, which can nudge clocks to maintain stability during line sag or ambient spikes rather than face-planting into throttling, and the 8 GB memory comfortably accommodates current DAG sizes with headroom for future epochs; operating parameters are broad enough for real-world environments-5–40°C and 5–95% non-condensing humidity-though your silicon will thank you for dust filtration and a sane dew point, and Ethernet connectivity (use a wired link, ideally on an isolated VLAN with a static IP) yields consistent stratum sessions plus low variance when paired with a primary and failover pool; enterprise-leaning safeguards-signed firmware, access controls, and protections against unauthorized modification-reduce attack surface, while the bundled PSU simplifies rollouts on ordinary circuits as long as you leave electrical headroom and avoid daisy-chaining; day-to-day care is refreshingly mundane: set strong admin credentials, disable unused services, schedule periodic fan and heatsink cleanings, monitor hashrate and temps via the web panel, and consider a conservative fan curve or mild undervolt if your room sits at the warm end of the spec; taken together, this is a miner engineered for efficient, steady hashing rather than theatrical noise or thermal drama, a small box that, when given air and a sane network, just keeps producing shares.
Wo kaufen?
Vertraute Anbieter und aktuelle Marktverfügbarkeit, die verifizierte Lieferanten präsentieren, die diesen ASIC Miner sowie ihre aktuellen Preise und Lagerbestände anbieten.
Keine Angebote verfügbar
Derzeit gibt es keine Angebote für diesen Miner. Bitte kommen Sie später wieder.
Technische Spezifikationen
Detaillierte Hardware-Spezifikationen und Mining-Fähigkeiten für Jasminer X16-Q Jasminer X16-Q ETC Miner
Basisinformationen
Performance
Physical Dimensions
Abbaubare Kryptowährungen
Algorithmus Informationen: Etchash
Erfahren Sie mehr über die Etchash Algorithmus und wie er funktioniert.
Etchash ist eine kryptografische Hash-Funktion, die als Rückgrat von Ethereum Classic Proof-of-Work-Konsensmechanismus. Dieser Algorithmus verarbeitet Eingabedaten beliebiger Länge und erzeugt einen festen Hash-Wert, der Sicherheit und Integrität im Mining-Prozess gewährleistet.
Benutzerbewertungen
Sieh dir an, was die Nutzer über diesen Miner sagen.
Noch keine Bewertungen
Sei der Erste, der diesen Miner bewertet!
Häufig gestellte Fragen
Alles, was Sie über die wissen müssen Jasminer X16-Q Jasminer X16-Q ETC Miner
Wie effizient ist die Jasminer X16-Q Jasminer 1.95GH/s?
Was sind die Stromkosten für die Jasminer X16-Q Jasminer 1.95GH/s (USD)?
Wie viel Leistung hat die Jasminer X16-Q Jasminer 1.95GH/s
Wer stellt die X16-Q Jasminer?
Was ist die Hashrate des Jasminer X16-Q Jasminer?
Welche Kryptowährungen können mit dem Jasminer X16-Q Jasminer 1.95GH/s?
NiceHash (BTC)
Ethereum Classic (ETC)
Englisch
Deutsch
Ungarisch
Niederländisch
Spanisch
Französisch
Italienisch
Tschechisch
Polnisch
Griechisch