Dayun Zig Z1 Pro Z1Pro

The Dayun Zig Z1 Pro is a Lyra2REv2 ASIC miner that delivers a steady 13 GH/s while drawing about 1500 W, a balance that makes it well suited for mining Vertcoin, MonaCoin, Galactrum, Rupee and Straks; beneath its utilitarian shell lie custom 28 nm ASIC chips tuned specifically for Lyra2REv2, an advanced cooling architecture with high-efficiency heatsinks and four high-speed fans arranged as dual pairs to keep thermals safe and prolong component life, and a noise signature around 72 dB, all designed to run reliably between 5 and 45°C with humidity tolerance from 5 to 95 percent; connectivity is handled via Ethernet and the unit runs on a 12 V supply while firmware permits fine-grained voltage and frequency adjustments so miners can tune power draw against electricity costs, and a built-in web interface supports remote monitoring and management in real time; when you translate those figures into practical terms, the miner’s efficiency works out to roughly 8.7 MH/s per watt, and pairing that efficiency data with a profitability calculator that factors in power consumption, pool fees and chosen payout currency will give realistic daily, monthly and annual yield estimates, all useful for deciding deployment scale, cooling needs, and whether to farm it individually or as part of a larger rig-an instrument of quiet persistence, technical clarity and measured power, flowing like a beam of light through water as you balance returns, noise, and operational limits.

The Dayun Zig Z1 Pro presents itself as a purpose-built Lyra2REv2 ASIC whose engineering language is economy and endurance: roughly 13 gigahashes per second for about 1500 watts of draw, produced by custom 28 nm ASIC dies tuned to that algorithm and making it appropriate for coins such as Vertcoin, MonaCoin, Galactrum, Rupee and Straks; its raw efficiency works out to approximately 8.7 megahashes per watt, a figure useful when weighing electricity against expected yield, and the unit’s thermal and electrical architecture is arranged to sustain that output reliably - high‑static‑pressure fans (four high‑speed units arranged as two pairs) force air through dense, high‑efficiency heatsinks while a PCB routed for enhanced dissipation and a reinforced aluminum shell reduce hotspots and electromagnetic interference, together extending component life and stabilizing hash rates even under prolonged runs; onboard firmware and calibrated power delivery permit granular voltage and frequency adjustments so an operator can tune performance to local power economics, and the built‑in web interface over Ethernet supports remote monitoring and management in real time, including temperature and fan controls, which is essential because nearly all of the 1500 watts becomes heat (on the order of five thousand BTU per hour) and must be removed with adequate ventilation and electrical provisioning; noise is notable - around 72 decibels - so placement, acoustic isolation and airflow planning matter as much as electrical supply and humidity control, since the device is rated to operate between roughly 5 and 45 °C with wide humidity tolerance; in practical deployment consider a well‑ventilated, dedicated circuit and a robust 12‑volt supply with margin, keep firmware current, monitor for thermal trends and power fluctuations, and decide whether to run units singly or in grouped racks to optimize cooling, maintenance and pool strategy - functional, restrained, and almost ritual in its insistence on discipline, the Z1 Pro reads like a compact myth against forgetting: respect the heat, measure the draw, tune the firmware, and its steady performance will be the memory you can build on.

Lyra2REv2 a kriptográfiai hash függvény, amely a gerincét képezi Monacoin munkaigazolás konszenzus mechanizmus. Ez az algoritmus bármilyen hosszúságú bemeneti adatot dolgoz fel, és egy rögzített hash értéket állít elő, biztosítva a biztonságot és az integritást a bányászati folyamat során.