Bitmain Antminer S19k Pro (136Th)
Antminer S19k Pro winstgevendheidsinformatie aangedreven door realtime gegevens: Ontdek hoeveel jouw Antminer S19k Pro kan verdienen met onze geavanceerde ASIC-miner calculator. We gebruiken live mining beloningsdata en berekenen automatisch de elektriciteitskosten, waardoor je een duidelijk overzicht krijgt van je potentiële dagelijkse, maandelijkse en jaarlijkse opbrengsten.
Winstgevendheidsanalyse
Hier kunt u een gedetailleerde analyse van de winstgevendheid van miners zien, die in realtime wordt bijgewerkt.
| . | Inkomen | Uitgave | Winst |
|---|---|---|---|
|
Dagelijks
|
$6.17 | $6.27 |
$-0.10
|
|
Maandelijks
|
$185.01 | $188.01 |
$-3.00
|
|
Jaarlijks
|
$2,250.91 | $2,287.41 |
$-36.50
|
Over het Bitmain Antminer S19k Pro (136TH/s)
Leer meer over deze ASIC miner, inclusief de specificaties, prestaties, energieverbruik en winstgevendheid.
The Bitmain Antminer S19k Pro (136Th) packs a punch with a steady 136TH/s at about 3264W, chomping through SHA-256 hashes for coins like Bitcoin, Bitcoin Cash, and Bitcoin SV while holding a power efficiency around 24 J/TH for dependable, around-the-clock performance. Built for stability over long runs, it supports both air-cooled rigs and immersion tanks, so you can tailor noise, heat, and maintenance to your setup; speaking of noise, at roughly 75 decibels it’s more “busy workshop” than “library,” so give it a well-ventilated space or a sound-managed enclosure. The unit typically uses an integrated power supply and prefers a 200–240V dedicated circuit with clean, stable power, hardwired Ethernet for reliable connectivity, and good airflow management at the intake and exhaust to keep temps in check; think cool, dust-filtered intake air and regular cleaning to prevent throttling. For best longevity, maintain ambient temperatures in a moderate range, watch humidity, and monitor fan RPMs and board temperatures via your pool dashboard or management software; many operators also use firmware profiles to tune for quieter or more efficient operation when the environment allows. If you’re planning your deployment, consider breaker capacity, cable gauge, and a quality PDU, and remember that immersion can slash noise, even out chip temperatures, and reduce dust-related wear if set up correctly. To forecast returns, use a mining profitability calculator and factor in your local electricity rate, pool fees, expected uptime, network difficulty changes, and your chosen power profile to estimate daily, monthly, and yearly output before you flip the switch.
Ontdek welke coins deze miner kan minen
Verken de cryptocurrencies die gedolven kunnen worden met Bitmain Antminer S19k Pro (136TH/s), inclusief gedetailleerde winstgevendheid.
Valuta Converter
Bereken de mijnbare coins naar elke valuta.
| Munt | Inkomen per dag | Winst/Dag |
|---|---|---|
|
$5.75
$
0.00005650
|
$-0.52
$
-0.00000513
|
|
|
$5.79
$
0.00005678
|
$-0.48
$
-0.00000471
|
|
|
$5.66
$
0.01116062
|
$-0.60
$
-0.00118596
|
|
|
$6.17
$
15.40
|
$-0.10
$
-0.24069644
|
Historische Mining Prestaties
Bekijk de prestatie-trends van Bitmain Antminer S19k Pro (136TH/s) over wekelijkse, maandelijkse en jaarlijkse tijdframes.
Historische winstgevendheid
Bekijk de historische inkomsten- en winsttrends voor deze miner.
SHA-256 Miner Generaties
Evolutie van cryptocurrency mining hardware door de jaren heen, met de huidige generatie gemarkeerd ter referentie.
Generatie 1
26 MijnwerkersGeneratie 2
26 MijnwerkersGeneratie 3
26 MijnwerkersGeneratie 4
26 MijnwerkersGeneratie 5
26 MijnwerkersGeneratie 6
26 MijnwerkersGeneratie 7
27 MijnwerkersGeneratie 8
27 MijnwerkersGeneratie 1
26 MijnwerkersGeneratie 2
26 MijnwerkersGeneratie 3
26 MijnwerkersGeneratie 4
26 MijnwerkersGeneratie 5
26 MijnwerkersGeneratie 6
26 MijnwerkersGeneratie 7
27 MijnwerkersGeneratie 8
27 MijnwerkersMeer informatie over de
Leer meer over de Bitmain Antminer S19k Pro (136TH/s)
The Bitmain Antminer S19k Pro (136Th) employs second‑generation 5 nm BM1368 ASICs to execute SHA‑256 workloads for assets such as Bitcoin, Bitcoin Cash, and Bitcoin SV, delivering a sustained 136 TH/s at approximately 3264 W, which equates to about 24 J/TH under nominal conditions; the device maintains stability over extended duty cycles through coordinated voltage and frequency tuning that balances thermal headroom with throughput, and its soft‑start power sequencing lowers inrush current to reduce stress on the PSU and upstream protection devices. Thermal management is addressed by a dual‑fan assembly with asymmetric blade geometry that curbs turbulence while preserving static pressure across the heat sinks, aided by firmware that performs per‑chain auto‑tuning, hashrate smoothing on unstable power, and watchdog recovery, with secure, signed updates and automatic pool failover via standard Stratum protocols. Acoustic output is roughly 75 dB, so the unit should operate in a well‑ventilated, controlled environment with clean intake air, unobstructed exhaust, and routine dust mitigation; typical operating envelopes target moderate ambient temperatures and non‑condensing humidity, with onboard sensors enforcing throttling or orderly shutdown if thresholds are exceeded. Electrically, the integrated high‑efficiency supply with active power factor correction is intended for 200–240 V service and draws on the order of 14–16 A at rated load, and operators should provision appropriately rated circuits, cabling, and surge protection; networking is hardwired Ethernet for low‑latency, deterministic pool communication. The chassis conforms to the standard S19 footprint for common racks, and the firmware exposes a web interface and management API for monitoring board temperatures, fan RPM, voltage bins, error counters, and event logs, enabling precise diagnostics and profile selection for performance or efficiency. Heat rejection is approximately 11,100 BTU/h at full load, which should be accounted for in room‑level HVAC or ducted exhaust, and the platform’s coolant‑adaptable materials and sealing make it amenable to aftermarket immersion deployments when fans are removed and proper dielectric fluids are used, improving component longevity and temperature uniformity in dense farms.
Waar te Kopen?
Betrouwbare verkopers en actuele marktbeschikbaarheid, met een overzicht van geverifieerde leveranciers die deze ASIC miner aanbieden, samen met hun nieuwste prijzen en voorraadinformatie.
Geen aanbiedingen beschikbaar
Er zijn momenteel geen aanbiedingen voor deze miner. Kijk later opnieuw.
Technische specificaties
Gedetailleerde hardware specificaties en miningcapaciteiten voor Bitmain Antminer S19k Pro (136Th)
Basisinformatie
Performance
Physical Dimensions
Mijnbare Cryptovaluta
Algoritme Informatie: SHA-256
Leer meer over de SHA-256 algoritme en hoe het werkt.
SHA-256 is een cryptografische hashfunctie die als ruggengraat dient van Fractal Bitcoin proof-of-work consensusmechanisme. Dit algoritme verwerkt invoergegevens van elke lengte en produceert een vaste hash-waarde, wat zorgt voor veiligheid en integriteit in het miningproces.
Crypto Mining Pools
Verbind met de meest betrouwbare mining pools en maximaliseer je crypto mining efficiëntie met geoptimaliseerde uptime en winstgevendheid.
Gebruikersrecensies
Zie wat gebruikers zeggen over deze miner.
Geen beoordelingen nog
Wees de eerste om deze miner te beoordelen!
Veelgestelde Vragen
Alles wat je moet weten over de Bitmain Antminer S19k Pro (136Th)
Hoe efficiënt is de Bitmain Antminer S19k Pro 136TH/s?
Wat zijn de elektriciteitskosten voor de Bitmain Antminer S19k Pro 136TH/s (USD)?
Hoeveel vermogen verbruikt de Bitmain Antminer S19k Pro 136TH/s gebruik?
Wie vervaardigt de Antminer S19k Pro?
Wat is de hashrate van de Bitmain Antminer S19k Pro?
Welke cryptocurrencies kunnen worden gemined met de Bitmain Antminer S19k Pro 136TH/s?
NiceHash (BTC)
Bitcoin (BTC)
Bitcoin Cash (BCH)
Fractal Bitcoin (FB)
Engels
Duits
Hongaars
Nederlands
Spaans
Frans
Italiaans
Tsjechisch
Pools
Grieks